{"title":"Tac Aerial","description":"","products":[{"product_id":"tac-aerial-goggles-3-mount-g3m","title":"Tac Aerial Goggles 3 Mount (G3M)","description":"\u003cp\u003e\u003cspan\u003eDeveloped at the request of front-line drone operators and in collaboration with \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/tacaerial.com\/\" target=\"_blank\"\u003eTac Aerial\u003c\/a\u003e, the Goggles 3 Mount (G3M) is a full aluminum mount that allows the attachment of the DJI Goggles 3 to any modern NVG helmet mount, all without any modifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows operators to retain helmets' ballistic protection, communications, and other mission-essential equipment\u003c\/li\u003e\n\u003cli\u003eMachined from billet 6061T6 aluminum and anodized matte black\u003c\/li\u003e\n\u003cli\u003eLeverages all of the functionality and adjustments of modern NVG mounts including tilt, fore\/aft, and up\/down adjustments\u003c\/li\u003e\n\u003cli\u003eFactory head-band use is maintained\u003c\/li\u003e\n\u003cli\u003eEasy-to-use thumbscrew for fast tension adjustments and storage\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications required - simple 1-bolt installation\u003c\/li\u003e\n\u003cli\u003eRear tether attachment point to keep entire system secure and retained\u003c\/li\u003e\n\u003cli\u003eAvailable for dovetail (Wilcox G24 style)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUsing a simple one-bolt install, the G3M securely clamps onto the main body of the Goggles 3 and gives operators the flexibility to use the Goggles 3 with or without a helmet. The G3M is available in two versions - long arm for those looking to keep the factory brow pad and switch between helmet and head use; or short arm for those seeking the ultimate in ergonomics and has a \u003ca href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-custom-goggles-3\" rel=\"noopener noreferrer\" target=\"_blank\"\u003emodified Goggles 3 with brow pad removed\u003c\/a\u003e. An easily-accessible thumb-screw adjusts for tension of the goggle pivot and can be easily loosened to fold the dovetail horn out of the way when the Goggles 3 is used in head-band mode, reducing user profile, or for storage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e100% designed and made in Canada, the G3M is available for Goggles 3 with factory brow pad, or \u003ca href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-custom-goggles-3\"\u003eTac Aerial-modified Goggles 3 with the brow pad removed\u003c\/a\u003e. Due to the height of the brow pad, please purchase the correct goggle mount as the arm lengths differ.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/HBvVy08WpVY?si=6VAgXOZHW7UQraih\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eG3M Full Length with Goggles 3 brow pad\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/G3M_FullLengthFinalPics-4.jpg?v=1754523958\"\u003e\u003cbr\u003e\u003cbr\u003eG3M Short with Tac Aerial-modified Goggles 3 (brow pad removal required):\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/TacAir_PadDelete.jpg?v=1758740346\"\u003e\u003c\/p\u003e","brand":"Tac Aerial","offers":[{"title":"Full Length Mount (Stock Brow Pad)","offer_id":51187347325237,"sku":null,"price":319.99,"currency_code":"CAD","in_stock":true},{"title":"Short Mount (Brow Pad Removal Required)","offer_id":52445072490805,"sku":null,"price":319.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirG3M_Mount.jpg?v=1754576085"},{"product_id":"tac-aerial-custom-goggles-3","title":"Tac Aerial Custom Goggles 3","description":"\u003cp\u003eThe \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/tacaerial.com\/\" target=\"_blank\"\u003eTac Aerial\u003c\/a\u003e Custom Goggles 3 is a pre-modified version of the DJI Goggles 3 with the Brow Pad Delete and \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-goggles-3-mount-g3m\" target=\"_blank\"\u003eGoggles 3 Mount\u003c\/a\u003e for enhanced integration with helmet systems. By removing the factory brow pad and strap, the TAC Goggles 3 offers a much smoother deploy\/stow experience, and users are able to easily use all of the adjustments of their NVG mount. Tac Aerial uses factory-new DJI Goggles 3 and performs the retrofit entirely in-house in a clean room.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/HBvVy08WpVY?si=g8CjWaRvAUVFRC7A\u0026amp;start=90\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe TAC Goggles 3 Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoval of brow pad and hinge mechanism\u003c\/li\u003e\n\u003cli\u003eRelocation of factory antennas to the main body of the Goggles 3\u003c\/li\u003e\n\u003cli\u003eRemoval of fabric head strap\u003c\/li\u003e\n\u003cli\u003eInstallation of custom polymer plugs to prevent dirt and water intrusion on sides of battery pack and top of Goggles 3\u003c\/li\u003e\n\u003cli\u003eRelocation and replacement of stock cable with thicker gauge, flexible, low resistance wiring for ease of helmet use\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-custom-goggles-3\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-goggles-3-mount-g3m\" target=\"_blank\"\u003eGoggles 3 Mount - \u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-goggles-3-mount-g3m\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-goggles-3-mount-g3m\" target=\"_blank\"\u003eShort\u003c\/a\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-goggles-3-mount-g3m\" target=\"_blank\"\u003e(G3M)\u003c\/a\u003e included - ready to use out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach Goggle is modified and fully tested for function before shipping. Note that the TAC Goggles 3 will not come with the factory brow pad and should always be used on a helmet.\u003c\/p\u003e","brand":"Tac Aerial","offers":[{"title":"No - Modded Goggles Only","offer_id":52499734364469,"sku":null,"price":1099.0,"currency_code":"CAD","in_stock":true},{"title":"Yes - Include G3M Short","offer_id":52499734397237,"sku":null,"price":1399.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_G3MPadDelete.jpg?v=1758672751"},{"product_id":"tac-aerial-avata-2-ready-to-fly-kit","title":"Tac Aerial Avata 2 Ready-To-Fly Duty Kit","description":"\u003cp\u003eThe Tac Aerial Avata 2 Ready-to-Fly Kit is a heavily-modified, duty-ready version of the DJI Avata 2 Fly More kit and includes the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDJI Avata 2 with Tac Aerial Hammerhead Light Kit installed (over 3000 lumens onboard)\u003c\/li\u003e\n\u003cli\u003eDJI Goggles 3 (With or Without \u003ca href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-custom-goggles-3\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTac Aerial Brow Pad Delete\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eTac Aerial Goggles 3 Mount (G3M)\u003c\/li\u003e\n\u003cli\u003e3 DJI Batteries\u003c\/li\u003e\n\u003cli\u003eDJI Motion Controller \u003c\/li\u003e\n\u003cli\u003eCustom hard case (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe DJI Avata 2 has become a staple in law enforcement, disaster recovery, and search and rescue. Deployed in situations where it may be too risky to send humans or animals, the Avata 2 can work in the tightest and most austere environments. Tac Aerial takes the entire Avata 2 ecosystem to the next level by adding critical enhancements and modifications to extend usability, increase interoperability, and operator and system safety. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHammerhead Light Kit\u003c\/strong\u003e - This light kit is bolted directly onto the Avata 2 and the superstructure is machined from 6061T6 aluminum and crash-tested. Offering 2000+ out-the-front lumens and 1000+ lumens on the bottom, the Hammerhead light kit gives night time and zero-visibility capability to the Avata 2. Unlike lights that are haphazardly taped on, the Hammerhead is fully integrated and is powered off the Avata 2's main battery, allowing operators to power on the light kit instantly and without the need to remember to charge separate lights. \u003c\/p\u003e\n\u003cp\u003eThe Light Kit is placed in optimal locations to minimize air flow disruptions and provide the highest amount of light for the optical flow sensors to work in light- and GPS-denied environments. Flight time is reduce by only 4 minutes with all lights on, in a static hover test.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirFullKit-1.jpg?v=1763415482\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTac Aerial Goggles 3 Mount \u003c\/strong\u003e- Maintaining bump or ballistic protection and communications is vital when flying sUAS systems in tactical or SAR applications. The Tac Aerial G3M (Goggles 3 Mount) allows operators to mount their DJI Goggles 3 to an NVG-compatible helmet (helmet mount not included). \u003ca href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-custom-goggles-3\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eAn optional modification to the Goggles 3 can remove the factory brow pad\u003c\/a\u003e for improved ergonomics. The TA-modified Goggles 3 removes the factory brow pad and lengthens the battery pack cable. When used with the Tac Aerial Goggles 3 Mount, this setup allows operators to mount the Goggles 3 just like NVGs and be able to quickly stow and deploy the Goggles 3. The battery pack can be mounted to the rear of the helmet, adding a functional counterweight.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirG3M_Mount-12.jpg?v=1754575930\" alt=\"\"\u003e\u003cbr\u003e\u003cem\u003eWith Brow Pad\u003c\/em\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_G3MPadDelete.jpg?v=1758672751\" alt=\"\"\u003e\u003cbr\u003e\u003cem\u003eBrow Pad Delete Mod (Without Brow Pad)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS Delete\u003c\/strong\u003e\u003cem\u003e - only available for professional end-users only. Proof of professional affiliation (MIL\/LE\/First Responder) is required. This modification is irreversible. \u003c\/em\u003e\u003c\/p\u003e","brand":"Tac Aerial","offers":[{"title":"Factory Goggles with Brow Pad \/ No - keep factory GPS module \/ No - Factory box only","offer_id":51338911744309,"sku":null,"price":2999.0,"currency_code":"CAD","in_stock":false},{"title":"Factory Goggles with Brow Pad \/ No - keep factory GPS module \/ Yes - Add Custom Hard Case","offer_id":52445068427573,"sku":null,"price":3099.0,"currency_code":"CAD","in_stock":false},{"title":"Factory Goggles with Brow Pad \/ Yes - disable GPS \/ No - Factory box only","offer_id":52445068460341,"sku":null,"price":3099.0,"currency_code":"CAD","in_stock":false},{"title":"Factory Goggles with Brow Pad \/ Yes - disable GPS \/ Yes - Add Custom Hard Case","offer_id":52445068493109,"sku":null,"price":3199.0,"currency_code":"CAD","in_stock":false},{"title":"Tac Aerial Modified - Brow Pad Removed \/ No - keep factory GPS module \/ No - Factory box only","offer_id":52445068525877,"sku":null,"price":2999.0,"currency_code":"CAD","in_stock":false},{"title":"Tac Aerial Modified - Brow Pad Removed \/ No - keep factory GPS module \/ Yes - Add Custom Hard Case","offer_id":52445068558645,"sku":null,"price":3099.0,"currency_code":"CAD","in_stock":false},{"title":"Tac Aerial Modified - Brow Pad Removed \/ Yes - disable GPS \/ No - Factory box only","offer_id":52445068591413,"sku":null,"price":3169.0,"currency_code":"CAD","in_stock":false},{"title":"Tac Aerial Modified - Brow Pad Removed \/ Yes - disable GPS \/ Yes - Add Custom Hard Case","offer_id":52445068624181,"sku":null,"price":3269.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/FullFlyKit_CHS.jpg?v=1763415482"},{"product_id":"tac-aerial-avata-2-hammerhead-drone-only","title":"Tac Aerial Avata 2 Hammerhead (Drone Only)","description":"\u003cp\u003eThe Tac Aerial Avata 2 Hammerhead is a heavily-modified, duty-ready version of the DJI Avata 2 FPV drone and features the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2000 out-the-front lumens\u003c\/li\u003e\n\u003cli\u003e1200 lumens on the bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGone are the days when you forget to charge your drone lights or have to turn on each light individually, the Hammerhead's integrated light kit draws power from the Avata 2's onboard battery, eliminating the need to remove and charge lights separately. In situations where seconds matter, all of the lighting can be turned on by a single unified switch, reducing takeoff time to seconds. Operators can also leave the switch in the \"on\" position, so the lights fire up as soon as the Avata is started.\u003c\/p\u003e\n\u003cp\u003eMain Features:\u003c\/p\u003e\n\u003cp\u003eNO EXTRA BATTERIES - The Hammerhead is designed to take the full voltage of the drone battery (17 volts) making it easy to run the lights for the entire duration of every flight.  \u003c\/p\u003e\n\u003cp\u003eFULL OUTPUT - LED drivers provide full brightness for the entire flight - no step down in power. The Hammerhead's chassis has integrated heatsinks built-in, providing efficient cooling without the risk of overheating regardless if the Avata is airborne or stationary with no airflow.\u003c\/p\u003e\n\u003cp\u003eSIMPLE SWITCH - Large, tactile on off switch only functions if the battery is powered ON - a failsafe of the Avata 2 battery. Activation of the LEDs is impossible if drone is powered OFF\u003c\/p\u003e\n\u003cp\u003eRELIABLE PARTS - Aluminum chassis and heatsinks machined in Canada, CREE COB LEDs, MEANWELL LED Drivers\u003c\/p\u003e\n\u003cp\u003eWHY WE MADE THIS ACCESSORY?\u003c\/p\u003e\n\u003cp\u003eThe DJI Avata 2 is an incredibly reliable service drone, and its capabilities are extended when it can see in the dark. Additionally, the downward facing LED makes it possible for the optical sensors to function in the dark, position-hold, navigate, and land without the need for GPS. \u003c\/p\u003e\n\u003cp\u003eWHY NOT A STANDALONE FLASHLIGHT? \u003c\/p\u003e\n\u003cp\u003eDuring testing and while flying many batteries in rapid succession, we found that the small flashlight add-on systems (sometimes velcro'd on) that are widely available were not sufficient to sustain multiple flights without having to recharge, or swap the lights out completely. Additionally, because of the size of these small lights and their batteries, the light is programmed to \"step down\" their light output as battery life decreases. This results in a drop in illumination part-way through the flight. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe DJI Avata 2 has become a staple in law enforcement, disaster recovery, and search and rescue. Deployed in situations where it may be too risky to send humans or animals, the Avata 2 can work in the tightest and most austere environments. Tac Aerial takes the entire Avata 2 ecosystem to the next level by adding critical enhancements and modifications to extend usability, increase interoperability, and operator and system safety. \u003c\/p\u003e\n\u003cp\u003eThe Light Kit is placed in optimal locations to minimize air flow disruptions and provide the highest amount of light for the optical flow sensors to work in light- and GPS-denied environments. Flight time is reduced by only 4 minutes with all lights on, in a static hover test.\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirFullKit-1.jpg?v=1763415482\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS Delete\u003c\/strong\u003e\u003cem\u003e - only available for professional end-users only. Proof of professional affiliation (MIL\/LE\/First Responder) is required. \u003c\/em\u003e\u003c\/p\u003e","brand":"Tac Aerial","offers":[{"title":"No - keep factory GPS module","offer_id":52113596645685,"sku":null,"price":1469.0,"currency_code":"CAD","in_stock":false},{"title":"Yes - disable GPS","offer_id":52445064200501,"sku":null,"price":1549.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirFullKit-1.jpg?v=1767113690"},{"product_id":"tac-aerial-avata-2-hammerhead-diy-kit","title":"Tac Aerial Avata 2 Hammerhead DIY Light Kit","description":"\u003cp\u003e\u003cstrong\u003eThis is for the DIY Light Kit; Expert installation is recommended. The drone is NOT included. For complete flight-ready Hammerhead Avata 2, click \u003ca href=\"https:\/\/coldharboursupply.com\/products\/tac-aerial-avata-2-hammerhead-drone-only\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tac Aerial Avata 2 Hammerhead is a heavily-modified, duty-ready version of the DJI Avata 2 FPV drone and features the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2000 out-the-front lumens\u003c\/li\u003e\n\u003cli\u003e1200 lumens on the bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGone are the days when you forget to charge your drone lights or have to turn on each light individually, the Hammerhead's integrated light kit draws power from the Avata 2's onboard battery, eliminating the need to remove and charge lights separately. In situations where seconds matter, all of the lighting can be turned on by a single unified switch, reducing takeoff time to seconds. Operators can also leave the switch in the \"on\" position, so the lights fire up as soon as the Avata is started.\u003c\/p\u003e\n\u003cp\u003eNow available as a ready-to-install light kit. Kit will include the following parts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHammerhead Top Module with 2x LEDs (2000 lumens total), drivers and switch pre-installed; live wire lead (installer will need to remove the Avata 2 top plate and wire this to the Avata 2)\u003c\/li\u003e\n\u003cli\u003eHammerhead Bottom Module with 1x LED assembly (1200 lumens), connectorized with Top Module\u003c\/li\u003e\n\u003cli\u003eFront Landing Legs\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eINSTRUCTIONS:\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/SOiam7EoyUE?si=rRuSzyJ_OPU9dBhc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMain Features:\u003c\/p\u003e\n\u003cp\u003eNO EXTRA BATTERIES - The Hammerhead is designed to take the full voltage of the drone battery (17 volts) making it easy to run the lights for the entire duration of every flight.  \u003c\/p\u003e\n\u003cp\u003eFULL OUTPUT - LED drivers provide full brightness for the entire flight - no step down in power. The Hammerhead's chassis has integrated heatsinks built-in, providing efficient cooling without the risk of overheating regardless if the Avata is airborne or stationary with no airflow.\u003c\/p\u003e\n\u003cp\u003eSIMPLE SWITCH - Large, tactile on off switch only functions if the battery is powered ON - a failsafe of the Avata 2 battery. Activation of the LEDs is impossible if drone is powered OFF\u003c\/p\u003e\n\u003cp\u003eRELIABLE PARTS - Aluminum chassis and heatsinks machined in Canada, CREE COB LEDs, MEANWELL LED Drivers\u003c\/p\u003e\n\u003cp\u003eWHY WE MADE THIS ACCESSORY?\u003c\/p\u003e\n\u003cp\u003eThe DJI Avata 2 is an incredibly reliable service drone, and its capabilities are extended when it can see in the dark. Additionally, the downward facing LED makes it possible for the optical sensors to function in the dark, position-hold, navigate, and land without the need for GPS. \u003c\/p\u003e\n\u003cp\u003eWHY NOT A STANDALONE FLASHLIGHT? \u003c\/p\u003e\n\u003cp\u003eDuring testing and while flying many batteries in rapid succession, we found that the small flashlight add-on systems (sometimes velcro'd on) that are widely available were not sufficient to sustain multiple flights without having to recharge, or swap the lights out completely. Additionally, because of the size of these small lights and their batteries, the light is programmed to \"step down\" their light output as battery life decreases. This results in a drop in illumination part-way through the flight. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe DJI Avata 2 has become a staple in law enforcement, disaster recovery, and search and rescue. Deployed in situations where it may be too risky to send humans or animals, the Avata 2 can work in the tightest and most austere environments. Tac Aerial takes the entire Avata 2 ecosystem to the next level by adding critical enhancements and modifications to extend usability, increase interoperability, and operator and system safety. \u003c\/p\u003e\n\u003cp\u003eThe Light Kit is placed in optimal locations to minimize air flow disruptions and provide the highest amount of light for the optical flow sensors to work in light- and GPS-denied environments. Flight time is reduced by only 4 minutes with all lights on, in a static hover test.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirFullKit-1.jpg?v=1763415482\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS Delete\u003c\/strong\u003e\u003cem\u003e - only available for professional end-users only. Proof of professional affiliation (MIL\/LE\/First Responder) is required. \u003c\/em\u003e\u003c\/p\u003e","brand":"Tac Aerial","offers":[{"title":"Default Title","offer_id":52232103952693,"sku":null,"price":499.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/CHS_TacAirFullKit-1.jpg?v=1767113690"},{"product_id":"tac-aerial-genesis","title":"Tac Aerial Genesis","description":"\u003cp\u003e\u003cstrong\u003eRESTRICTED - GOVERNMENT PURCHASE ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tac Aerial Genesis is an intuitive ISR drone with 2000 lumens of onboard illumination and tiltable camera, designed to gather information and intelligence where humans, dogs, or standard drones cannot. The Genesis features built-in altitude- and position-hold, making flying easy. The illumination is intensity-adjustable and controlled by the drone pilot at the controller level mid-flight, allowing maximum illumination or discrete observation when needed. The high-powered LEDs also allow the navigation sensors to function correctly in GPS and light-denied environments.\u003c\/p\u003e\n\u003cp\u003eThe video payload is designed to be modular and can accept NDAA-compliant analog or digital video transmission in both visible and thermal spectrums, depending on mission requirements. The default battery provides approximately 10 minutes of flight time but can be increased with a larger battery if needed. \u003c\/p\u003e\n\u003cp\u003eThe Genesis' chassis is made from high-strength carbon fibre and includes propeller guards for collision resistance. \u003c\/p\u003e\n\u003cp\u003eThe Genesis is designed and made in Canada, and is available as NDAA-compliant, or low-cost version. BlueUAS certification is pending.\u003c\/p\u003e\n\u003cp\u003ePrototype shown in picture, all details subject to change. \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e21 x 29 x 9 cm \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e500g (no battery) 629g (with battery)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight Time\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e10 minutes (approx)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1000 front; 1000 bottom (adjustable)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight Distance\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2km (line of sight)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePropeller Size\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e8.9cm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Speed\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e45km\/h\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWind Resistance\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e30km\/h\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Tac Aerial","offers":[{"title":"Default Title","offer_id":52902049218869,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/WhiteBG_GenesisProto.jpg?v=1779235340"},{"product_id":"tac-aerial-t1k-cuas-training-drone","title":"Tac Aerial T1K cUAS Training Drone","description":"\u003cp\u003e\u003cstrong\u003eRESTRICTED - GOVERNMENT PURCHASE ONLY\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tac Aerial T1K is a purpose-built drone designed as a low-cost training solution for counter-UAS training with standard small-arms (shotguns, rifles, EW jamming, etc). The T1K is armoured with extruded steel and aluminum and is designed to be modular and easily rebuildable, significantly reducing training costs and downtime. \u003c\/p\u003e\n\u003cp\u003eThe T1K is designed to be flown via LOS (Line of Sight) by experienced FPV pilots attached to training units. Prototype shown, all details subject to change. \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e Size\u003c\/td\u003e\n\u003ctd\u003e28 x 28 x 6.3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e708g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight Time\u003c\/td\u003e\n\u003ctd\u003e4 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop Speed\u003c\/td\u003e\n\u003ctd\u003e100 km\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProp Size\u003c\/td\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tac Aerial","offers":[{"title":"Default Title","offer_id":52909744455989,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/8123\/0009\/files\/WhiteBG_T1KProto.jpg?v=1779379447"}],"url":"https:\/\/coldharboursupply.com\/en-au\/collections\/tac-aerial.oembed","provider":"Cold Harbour Supply","version":"1.0","type":"link"}