Unit price/ per
** Special-Order Item; 2-3 week lead time **
The Iray / InfiRay JerryC C2 is a Clip-On Thermal Imager (COTI) that features a high 384x288 resolution, 12um sensor with a 50Hz refresh rate. The C2 easily attaches to existing night vision devices (NVDs) to instantly add thermal detection capabilities by overlaying a thermal image on top of the analog image intensified image, creating multi-spectrum capability and removing the need to switch to a completely separate device. The JerryC C2 provides 20 degrees of thermal overlay for increased thermal field of view. With a standard quick disconnect, the C2 interfaces to any night vision devices that also accepts PVS-14 optics, such as DTNVS, Katana, RNVG, Sentinel, PVS-7, etc.
Functionally identical to the JerryC CE2, the critical difference is the C2 has on-board power AND an outboard battery port. However the C2 does not come with a battery pack. They can be purchased separately HERE.
Because the JerryC has onboard power, users wanting to use the external eyepiece adapter during the daytime, without the need for a host night vision device, will find this device much less cumbersome. The C2 weighs 110g compared to the CE2's 78g. The C2 also comes with a battery extender which allows the use of longer 18650 batteries.
3rd party external Battery Packs: It is not recommended to use 3rd party battery packs that use AA batteries or even CR123A's due to the high-drain nature of the JerryC device. Usage of these battery packs will provide substantially reduced runtime of not only the JerryC, but more importantly, the host night vision device (total runtime will drop to approximately 3-4 hours, at which point the battery pack must be dismounted from the helmet and all 4 batteries swapped)
NOTE: You will NOT be able to use refocus devices like the Matbock Tarsier Eclipse or Phokus Hoplite caps when using the JerryC devices due to the geometry of the system and how the JerryC mounts and projects onto your objective lens.
Detailed Features & Controls
The latest version of the C2 now allows users to calibrate the location/offset of the thermal image so that they can line up the analog night vision and thermal images perfectly. A copy of these instructions will be included with every C2. In addition, the C2 now "remembers" the orientation/settings from the last time the unit was on, even with the power disconnected. Users are also able to adjust brightness, contrast, and threshold.
The C2 has two main controls: a button and a multi-function dial. By default, the multi-function dial turns the unit on and controls gain. The C2 has 3 main display modes: full thermal, highlight, and outline. These are easily accessed by depressing the multi-function dial. Pulse Mode is accessed by clicking the button on the rear of the unit, once in Pulse mode, the frequency of the pulse can be controlled by the dial. Pulse mode is a mode that gently flashes the thermal image on and off, especially useful to differentiate between high light areas of the analog image and thermal signatures. Long-pressing the button will display the menu.
WARRANTY INFO: Standard 2-year warranty from Infiray Canada